Upgrading Your Software And Firmware; Additional Care And Maintenance - Kodak EasyShare User Manual

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the printer dock firmware (the software that runs on the printer
dock). Visit www.kodak.com/go/printerdockdownloads.

Additional care and maintenance

I Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the printer dock.
If you suspect water has gotten inside the printer dock, turn off the printer dock
I
and remove the paper tray and color cartridge. Allow all components to air-dry for
at least 24 hours before using the printer dock again.
I Connect a tripod directly to the camera; do not connect a tripod to the camera
dock or printer dock.
Service agreements are available in some countries. Contact a dealer of Kodak
I
products for more information.
This equipment is considered to be electronic equipment and contains parts that
I
are recyclable. As such, this equipment should not be incinerated or disposed of in
a landfill. Disposal of this equipment may be regulated in some jurisdictions due to
environmental considerations.
Disposal of color cartridges should be done in accordance with applicable
I
regulations.
I For more disposal or recycling information, contact your local authorities. In the
US, visit the Electronics Industry Alliance Web site at www.eiae.org.
www.kodak.com/go/support
Appendix
45