Kodak EasyShare User Manual page 40

Troubleshooting
If... Try the following
I
Pictures are
cropped
I
I
NOTE: Cropping may vary depending on the selected picture size
I
A selected
picture does not
print.
I
I
Nothing
happens when
I
you try to print
I
I
I
I
Nothing
happens when
I
you try to print
(from docked
I
camera)
34
Change the picture size or resolution on your digital camera to 3:2. See
your camera user's guide for details.
Adjust cropped pictures using Kodak EasyShare software on your
computer.
Select the proper paper size in print options if you are printing from an
application on your computer.
The image file may be corrupt. Review the picture on the camera or
computer and delete, if necessary.
The image file may not be JPEG format. The printer dock can only print
JPEG files in stand-alone mode. Connect to a computer
use Kodak EasyShare software to print BMP and TIFF formats
Check the power connections
Check the USB cable
Remove the paper tray. Check that paper is properly loaded, then
re-insert the tray (page
Load paper if paper message appears on your camera or computer.
Make sure the color cartridge is properly installed
cartridge if the cartridge message appears on your camera or computer.
Reseat the camera on the printer dock
Re-establish the connection. Remove the camera, then reseat it on the
printer dock.
Make sure there is at least one picture in the camera's internal memory
or memory card.
(page 3).
(page 19) and camera connections
6).
(page
www.kodak.com/go/support
(page 15).
(page 19) and
(page
(page 7).
(page 4). Install a new
7).
21).