Kodak EasyShare User Manual page 15

Refreshing the Kodak Ni-MH rechargeable camera battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH
rechargeable digital camera battery KAA2HR only. Li-Ion batteries do not
require refreshing.
NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The
refresh cycle completely discharges the battery, then fully charges it. See Extending battery life,
page 44.
1 Make sure the Ni-MH rechargeable battery is in the camera.
2 Place your EasyShare camera on the printer dock (see
3 Press and hold the
for 5 seconds, then release the buttons.
To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital
camera, visit www.kodak.com/go/accessories. See your camera user's guide for
battery compatibility.
www.kodak.com/go/support
8 hours for full
refresh
and Cancel buttons on the printer dock at the same time
Setting up your digital camera
Battery status light - green, when
page
charging is
complete .
7).
9