Cisco Catalyst 3750-E Software Configuration Manual page 1165

Hide thumbs Also See for Catalyst 3750-E:
Table of Contents

Advertisement

Configuring IP Multicast Routing
This chapter describes how to configure IP multicast routing on the Catalyst 3750-E or 3560-E switch.
IP multicasting is a more efficient way to use network resources, especially for bandwidth-intensive
services such as audio and video. IP multicast routing enables a host (source) to send packets to a group
of hosts (receivers) anywhere within the IP network by using a special form of IP address called the IP
multicast group address. The sending host inserts the multicast group address into the IP destination
address field of the packet, and IP multicast routers and multilayer switches forward incoming IP
multicast packets out all interfaces that lead to members of the multicast group. Any host, regardless of
whether it is a member of a group, can send to a group. However, only the members of a group receive
the message.
To use this feature, the switch or stack master must be running the IP services feature set. To use the PIM
stub routing feature, the switch or stack master can be running the IP base image.
Unless otherwise noted, the term switch refers to a Catalyst 3750-E or 3560-E standalone switch and to
a Catalyst 3750-E switch stack.
For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS IP
Note
Command Reference, Volume 3 of 3: Multicast, Release 12.2.
Understanding Cisco's Implementation of IP Multicast Routing, page 46-2
Multicast Routing and Switch Stacks, page 46-10
Configuring IP Multicast Routing, page 46-10
Configuring Advanced PIM Features, page 46-35
Configuring Optional IGMP Features, page 46-38
Configuring Optional Multicast Routing Features, page 46-44
Configuring Basic DVMRP Interoperability Features, page 46-49
Configuring Advanced DVMRP Interoperability Features, page 46-54
Monitoring and Maintaining IP Multicast Routing, page 46-63
For information on configuring the Multicast Source Discovery Protocol (MSDP), see
"Configuring MSDP."
OL-9775-08
C H A P T E R
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
46
Chapter 47,
46-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst3560-e

Table of Contents