Wirelesshd Settings Menu - Epson EH-TW9300W User Manual

Useful Functions
d
If projection does not start, press the
source.
Make sure you point the remote control at the projector when using the
control.
Projection starts.
e
When connecting two or more AV devices to the WirelessHD Transmitter, press the
button to switch images.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On from the Configuration menu.
Settings - WirelessHD - WirelessHD
s
•
Make sure you turn off the WirelessHD Transmitter if it is not going to be used for an extended period.

WirelessHD Settings Menu

a
Press the
The Configuration menu is displayed.
b
Select Settings - WirelessHD, and
then press the
the selection.
The WirelessHD settings screen is
displayed.
Available functions on the WirelessHD settings menu
Function
Connected Device
WirelessHD
Video Reception
Reset
p.62
s
button.
button to confirm
Displays the available WirelessHD device that can be connected. The device name and
MAC address (device number) are displayed. The MAC address is displayed on the label
on the base.
Enables or disables the WirelessHD function.
Displays the reception for the image being projected.
Resets WirelessHD settings to their default settings.
button on the remote control to change the
p.80
c
Make settings for each of the
displayed functions.
Explanation
58
button on the remote