Epson EH-TW9300W User Manual page 71

Using the Projector on a Network
d
Select Basic, and then set the following as necessary.
• Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
• PJLink Password: Set a password to use when you control the projector using compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
• Remote Password: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to single-byte 8 alphanumeric characters.
• Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Press the
button to enter them.
e
Select Wireless LAN, and then press the
f
Select the Connection Mode setting.
• Quick: Lets you quickly connect to multiple smartphones, tablets, or computers directly using wireless
communication. When you select Quick, go to step 10.
• Advanced: Lets you connect to multiple smartphones, tablets, or computers over a wireless network access
point. When you select Advanced, go to step 7.
g
Select Network Configuration - Wireless LAN - Search Access Point, to select the access
point you want to connect to.
c
If you need to assign the SSID manually, select SSID to enter the SSID.
buttons on the remote control to highlight characters, and then press the
button.
70