Replacing Consumables; Replacing The Air Filter - Epson EH-TW9300W User Manual

Maintenance
c
•
The lamp replacement message is set to appear after 3400 H in order to maintain the initial brightness
and quality of the projected images. The message display time changes depending on the usage
situation, such as the color mode setting and so on.
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp
may explode increases. When the lamp replacement message appears, replace the lamp with a new
one as soon as possible, even if it is still working.
•
Depending on the characteristics of the lamp and the way it has been used, the lamp may become
darker or stop working before the lamp warning message appears. You should always have a spare
lamp unit ready in case it is needed.

Replacing Consumables

Replacing the air filter

c
Dispose of used air filters properly in accordance with your local regulations.
•
Filter frame: Polypropylene
•
Filter: Polypropylene
a
Press the button on the remote
control or the
control panel to turn off the power,
and then disconnect the power cord.
b
Remove the air filter cover.
Hook your finger into the tab on the air filter
cover, and remove it from the lens side.
button on the
c
Remove the old air filter.
Grip the knob in the center of the air filter
and pull it out.
d
Install the new air filter.
Grip the air filter by the knob in the center
and insert it at an angle.
108