Epson EH-TW9300W User Manual page 11

Introduction
Button
g
Selects menu items and adjustment values.
s
h
The adjustment value returns to its default
value when pressed while the menu's adjust-
ment screen is displayed.
i
Displays and closes the Configuration menu.
On the Configuration menu, you can make
adjustments and settings for Signal, Image,
and so on.
j
Saves, loads, or erases a memory.
k
Sets the strength for Frame Interpolation.
s
l
Adjusts the hue, saturation, and brightness
for each RGBCMY color.
m
Performs the function assigned to the user
button.
n
(EH-TW9300W/EH-TW8300W only)
This is the button for controlling the Wire-
lessHD Transmitter.
Turns on the WirelessHD Transmitter, or
switches the input and output.
Make sure you point the remote control at the
WirelessHD Transmitter when performing
operations.
o
Changes the 3D format.
This projector supports the following 3D for-
mats.
•
Frame Packing
•
Side by Side
•
Top and Bottom
s
p
Selects the aspect mode according to the in-
put signal.
q
Displays and closes the test pattern.
r
Loads the lens position registered as Memo‐
ry1 or Memory2 in the Save Lens Position.
s
s
t
Returns to the previous menu level when a
menu is displayed.
A
When a menu is displayed, it accepts and en-
ters the current selection and moves to the
next level.
10
Function
p.76
s
p.76
s
p.36
p.37
s
p.80
s
p.49
s
p.43
p.33
s
p.41
p.76
s
p.76
s
p.76
p.41
s
p.28
s