Table of Contents
Advertisement
Configuration Menu
Function
SSID Display
IP Address Display
Security menu
Function
Security
Passphrase
Wired LAN menu
Function
DHCP
On, Off
IP Address
0 to 255 characters
Subnet Mask
0 to 255 characters
Gateway Address
0 to 255 characters
On, Off
IP Address Display
Menu/Settings
On, Off
On, Off
Menu/Settings
No, WPA2-PSK, WPA/
WPA2-PSK
From 8 to 32 single-
byte alphanumeric
characters
Menu/Settings
Explanation
Sets whether or not to display the SSID on the LAN Standby
screen and the Home screen (On or Off).
Sets whether or not to display the IP address on the LAN
Standby screen and the Home screen (On or Off).
Explanation
Sets the security.
In Quick, WPA2-PSK is selectable. In Advanced, WPA2-
PSK/WPA/WPA2-PSK is selectable.
Inputs the passphrase.
It is recommended to change the passphrase periodically for
the purpose of security.
Set whether or not (On/Off) to use DHCP. If this
is set to On, you cannot set any more addresses.
Enter the IP address assigned to the projector.
You can enter a number from 0 to 255 in each
field of the address. However, the following IP
addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
Enter the projector's subnet mask.
You can enter a number from 0 to 255 in each
field of the address. However, the following sub-
net masks cannot be used.
0.0.0.0, 255.255.255.255
Enter the projector's gateway IP address.
You can enter a number from 0 to 255 in each
field of the address. However, the following gate-
way addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
Set to Off to prevent the IP address from being
displayed on the Net. Info. - Wired LAN screen.
89
Explanation
Advertisement
Table of Contents
