Epson EH-TW9300W User Manual page 89

Configuration Menu
Basic menu
Function
Projector Name
PJLink Password
Remote Password
Display LAN Info.
Wireless LAN menu
Function
Connection Mode
Channel
SSID
Search Access Point
IP Settings
(This can only be set
when Connection
Mode is set to Ad‐
vanced.)
Menu/Settings
Up to 16 alphanumeric
characters
Up to 32 alphanumeric
characters
Up to 8 alphanumeric
characters
Text & QR Code, Text
Menu/Settings
Quick, Advanced
1ch, 6ch, 11ch
Up to 32 alphanumeric
characters
To Search View
DHCP
IP Address
Subnet Mask
Gateway Address
Explanation
Enter a name to identify the projector over a network.
Set a password to use when you control the projector using
compatible PJLink software.
Set a password to use when you operate the projector from
a smartphone or a tablet.
Set the display format for the projector's network information.
Explanation
Determines how the wireless LAN is connected.
Quick: Lets you connect to multiple smartphones, tablets, or
computers directly using wireless communication. Use
EasyMP MultiPC Projection to connect in this connection
mode. The projector acts as an easy access point.
(We recommend limiting the number of devices to six or less
to maintain the projection performance.)
Advanced: Lets you connect to multiple smartphones, tab-
lets, or computers over a wireless network access point.
(This can only be set when Connection Mode is set to Quick.)
Select the frequency bandwidth used by the wireless LAN.
(This can only be set when Connection Mode is set to Ad‐
vanced.)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
(This can only be selected when Connection Mode is set to
Advanced.)
Search for available wireless network access points.
indicates currently connected access points.
the access points where security is set.
If you select an access point which has security, Security menu
appears. p.89
s
Sets whether or not to use DHCP (On or Off). If this is set to
On, you cannot set any more addresses.
Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Inputs the subnet mask for the projector.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
88
p.116
s
indicates