Front Control Panel - Supermicro SUPERSERVER User Manual

S S
UPER ERVER 7048R-C1RT/7048R-C1R User's Manual

Front Control Panel

JF1 contains header pins for buttons and indicators located on the control panel
at the front of the chassis.
Power Button
Reset Button
3.3V
UID LED
NIC2 Activity LED
NIC1 Activity LED
UID Switch
3.3 V
X
NMI
Power Button
The Power button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. To turn off the power when
the system is on, press the button for 4
seconds or longer. Refer to the table on
the right for pin definitions.
Reset Button
The Reset button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the front control
panel. Refer to the table on the right for
pin definitions.
2
1
Ground
Ground
Power Fail LED
OH/Fan Fail/
PWR Fail LED)
NIC2 Link LED
NIC1 Link LED
HDD LED
FP PWRLED
X
Ground
19 20
Power Button
Pin Definitions
(JF1)
Pin# Definition
1 Signal
2 Ground
Reset Button
Pin Definitions
(JF1)
Pin# Definition
3 Reset
4 Ground
5-14
Power Fail LED
The Power Fail LED connection
is located on pins 5 and 6 of JF1.
Refer to the table on the right for pin
definitions.
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and UID
LED connections. The red LED on pin
8 provides warnings of overheat, fan
failure or power failure. The Blue LED
on pin 7 works as the front panel UID
LED indicator. Refer to the table on
the right for pin definitions.
NIC1/NIC2 LED Indicators
The network interface controller (NIC)
LED connection for LAN port 1 is
located on pins 11 and 12 of JF1, and
the LED connection for LAN Port 2 is
on pins 9 and 10. Attach the NIC LED
cables here to display network activity.
Refer to the table on the right for pin
definitions.
HDD LED/UID Switch
The UID switch connection is pin 13.
Attach a cable to pin 13 to use UID
switch. The HDD LED connection is
located on pin 14. Attach a cable to
pin 14 to show HDD activity status.
See the table on the right for pin
definitions.
5-15
Chapter 5: Advanced Serverboard Setup
PWR Fail LED Pin
Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
OH/Fan Fail/ PWR Fail/Blue_
UID LED Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Definition
Off Normal
On Overheat
Flashing Fan Fail
LAN 1/2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
10 NIC 2 Link LED
11 NIC 1 Activity LED
12 NIC 1 Link LED
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 UID Switch
14 HD Active