Appendix B Quick Reference Guide - Hach Sigma 900 User Manual

All weather refrigerated sampler
Hide thumbs Also See for Sigma 900:
Table of Contents

Advertisement

Appendix B
For best results, read the instrument manual before beginning. Use this guide as a reminder.
Select the Location
Place the sampler on level ground or suspend it from a suspension harness as close to the sample source as possible.
Insert the Bottles
Install the desired bottle positioner and bottle set in the tray. For multiple bottle operation, install the distributor assembly on the
bottom of the controller section. After the bottles are in place, fill the base with crushed ice if you need to cool the samples.
Install the Intake Tubing
Install a segment of vinyl intake tubing from the sampler tubing connector to the intake strainer. Measure and cut the tubing to
the nearest whole foot. Enter this length when programming the instrument. For Teflon
page
17.
Program the Instrument
Parameter Entry
(press the * key)
Alter Parameters
Advanced Program
Number of Bottles
Bottle Unit of Measure
Bottle Volume
Tubing Length Unit of Measure
Tubing Length
Program Lock (Access Code)
Level Control?
External Start?
First Flush Period
# of First Flush Bottles
Set Timed Interval
Bottles per Sample or
Samples per Bottle
First Flush Sample Volume
Sample Time Limit
Special Output?
8837apdx_qrg.fm
Quick Reference Guide
New Program Entry
(press the NEW PROGRAM key)
Program Delay
Timed or Flow Mode (time or flow period
between samples)
Composite or Discrete (single bottle or
multiple bottle)
Number of Samples to Collect
Sample Volume
Sample Volume Calibration
Intake Rinses (intake line pre-rinse)
Intake Faults (retries)
Special Functions (press and hold the CLEAR/ENTRY key)
Special Output?
NO
YES
Level Start?
Level Start/Stop?
Storm Mode?
NO
Sample on Level?
YES
Sample Output or
Event Output or
YES
Trouble Output
®
-lined tubing refer to
Review Program Status and Entries
(press the DISPLAY FEEDBACK key)
Program Running
Number of Samples Collected
Number of Samples Remaining
Time Remaining Until Next Sample
Sample Output or
Event Output or
YES
Trouble Output
Quick Reference Guide
section 2.3.1 on
Page 65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents