Volume Calibration Sheet - Hach Sigma 900 User Manual

6.2 Volume Calibration Sheet

Name:
1. Auto Calibrate?
YES
If then go to Step 4.
NO
If then:
YES
a. Ready to Pump?
Press the
YES/ENTER
2. Enter actual volume pumped: _____________________
3. Program continued at Step 15 in Main Sampler Program.
You must completely step through the Main Sampler Program until you reach step 18. You will see
COMPLETE, READY TO START
the keypad. The sample volume will be the desired amount.
4. Timed Calibrate?
YES
If then:
NO
Program continued at Step 14b in Main Sampler Program
If then:
YES
Timed Calibrate - Ready to Pump?
Press key to begin pumping into the cylinder.
YES
5. Stop at mark
Press the
STOP PUMP
6. Try Again? or
YES NO
If then:
YES
Another sample cycle will begin.
If then:
NO
Program continued at Step 15 in Main Sampler Program
8837prgwrk.fm
Date:
or ?
NO
key to begin pumping liquid into graduated cylinder.
. At that time, you will manually take a sample by pressing
or ?
NO
key when liquid has reached the desired volume.
?
SN:
Section 6
ID#:
SETUP
on
TAKE SAMPLE
Page 57
Volume Calibration Sheet