Adding A New Bluetooth Device; Finding The Cordless Handset - Porsche PCM3 User Manual

Table of Contents

Advertisement

Adding a new Bluetooth device

In order that your Bluetooth device can be found
by the PCM, please ensure that the Bluetooth
function on the device has been switched on and
set to "visible".
If you wish to connect a cell phone using the SIM
Access Profile (PCM telephone only), external SIM
mode may also need be activated on some
devices.
Further details can be found in the operating
manual for your cell phone.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PHONE
"
> "
Bluetooth settings
"
New device
> "
".
A search is started and a list of the
devices found is displayed.
4. Choose the desired device by selecting it in the
list.
A Bluetooth code is displayed that you must
enter in the corresponding Bluetooth device.
Once you have entered the code, successful
authorization of the device is shown on the
display.
With some cell phones, the connection
request by the PCM must be explicitly
confirmed on the cell phone. This may even
have to be done a number of times in some
cases, for example before transferring the
phonebook.
To avoid this request, you can authorize the
PCM in your cell phone's list of devices. The
connection will then be established
automatically and without the need for further
checks in future.
Further details can be found in the operating
manual for your cell phone.
It can take a few seconds for the Bluetooth
device to be authorized.
If the list of authorized Bluetooth devices is full
(max. 5 cell phones), you must first delete a
device from the list. An appropriate message
will be displayed. To find out more, please
refer to the section "Deleting an authorized
Bluetooth device from the list" on page 92.

Finding the cordless handset

This function starts the search for the cordless
handset.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
SET PHONE
3. Select "
"
> "
Bluetooth settings
".
> Select "
Find handset
".
The search is started. If the receiver has
been found and is not in the charging
cradle, it will ring in confirmation and to
help you locate it in the vehicle.
PHONE
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents