Porsche PCM3 User Manual page 163

Calling up telephone mode
û Activate voice control.
Beep
"Telephone".
"Telephone".
The PCM switches to telephone mode.
If you have not yet entered the PIN, the PCM
now prompts you to do so.
Entering the PIN
The digits "zero" to "nine" are permitted when
entering the PIN. The following two options are
available to you when saying the digits:
– Say all digits in a single block without a pause.
– Group and say the individual digits in blocks,
for example the first three digits and then the
next three digits. Leave a pause after each
block and wait until the PCM has repeated the
digits from the last block entered before
saying the next block.
If you are saying the digits in blocks, you can
delete the last block using the "Correction"
command. The PCM then repeats the last correct
block and you can continue with your input.
The "delete" command deletes all your input.
If you are saying all the digits without a pause,
both these commands delete all the input.
û Activate voice control in the PIN input menu
(see above).
"PIN?".
Beep
"One Two Three Four".
"One Two Three Four".
Beep
"Ok".
"Checking the PIN".
The PCM switches to telephone mode if the
entered PIN is correct.
Entering a telephone number
The digits "zero" to "nine" as well as the following
words are permitted when entering the digits:
– "Star" for the '*' character
– "Hash" for the '#' character
– "Plus" for the '+' character
For overseas numbers, use the word "Plus" at the
start of the telephone number followed by the
national dialing code. Then enter the local area
code without the first digit, and then the telephone
number.
The following two options are available to you
when saying the telephone number:
– Say all digits in a single block without a pause.
– Say the telephone number in blocks, leaving a
pause after each block and waiting until the
PCM has repeated the digits from the last
block entered before saying the next block.
Voice Control
163