Advertisement
Bluetooth pairing
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated.
Turn ignition and radio "ON"
1.
LED inside module peephole will flash rapidly (pairing mode)
Bluetooth Settings
2. On A2DP device: go to
Bluetooth
3. Select
to enable
Scan for devices
4. Tap
.
5. Wait for Bluetooth device name (See Fig. 18) to appear and tap it.
paired confirmation tone is heard on car speakers
Noteworthy
: On Android devices it may be possible to change ID to
something of your choosing. This may not be possible on newer iOS devices.
Fig. 18
Test operation
Turn ignition and radio "ON"
1.
2. Repeatedly press CD/AUX button on radio until "AUX Mode" is displayed.
Alternately: Switch from CD to AUX by pressing "AUX" Soft key
3. Launch streaming application (e.g. Pandora, Apple music etc.)
4. Use media remote to change tracks, adjust device volume, pause etc.
5. Place test call. Press Pause/Play on media remote
6. If correct operation is confirmed go ahead and reinstall radio.
Once
Warning: Caller ID/text is not shown on radio display. Operate
Bluetooth device via wireless remote control, VR (voice recognition) or
smartphone built-in controls. Radio buttons can be used for tone and
playback level adjustments.
7. To listen to AUX device, simply connect to "AUX" input jack, press
Pause/Play on media remote control or pause or disable Bluetooth on audio
device. To return to music streaming; press Pause/Play or re-enable
Bluetooth on audio device.
8. If successful go ahead and reinstall radio
Congratulations, you've just updated your vehicle to support new technology
while preserving the original radio and dash components.
Enjoy!
Advertisement
