Porsche PCM3 User Manual page 159

Tuning to stored FM stations
You can either say the name of a stored station
from the FM main menu or the number of its
memory location.
û Activate voice control.
Beep
"Station KFOG".
"Station KFOG".
- or -
û Activate voice control.
Beep
"Station number 1".
"Station number 1".
The PCM tunes to the corresponding station.
Tuning to stored AM stations
You can say the memory location of a stored
station from the AM main menu.
û Activate voice control.
Beep
"Station number 1".
"Station number 1".
The PCM tunes to the corresponding station.
Entering a frequency
You can also tune to FM and AM stations by
entering the frequency. The frequency input menu
only accepts frequencies within the given
waveband.
– FM waveband: 87.9 – 107.9 MHz,
with 0.5 MHz increments.
– AM waveband: 530 - 1700 KHz,
with 1 kHz increments.
Example for entering the frequency 98.4 MHz in
the FM waveband:
û Activate voice control.
Beep
"Manual tune".
"Manual tune".
The display switches to the frequency input
menu.
"Please say the desired frequency.".
Beep
"Ninety-eight point four".
"Frequency Ninety-eight point four megahertz".
The PCM tunes to the corresponding
frequency, the frequency input menu stays
open.
 You can also enter the frequency without the
display switching to the frequency input menu
using the "Frequency" command, directly
followed by the desired MHz value.
Voice Control
159