Porsche PCM3 User Manual page 120

4. Select the desired recording.
5. Select " Transfer data ".
The list is opened again. You can now choose
whether you wish to transfer an individual
recording only or all recordings.
Select the desired recording or list entry using
" All ".
You can choose whether you wish to transfer
the data to an external device via a Bluetooth
connection or whether you wish to use the USB
interface to transfer the data.
A directory called " SportChrono " is created on
the storage medium during transfer of the
data.
Transferring data via the USB interface
6. Select " to USB ".
The data is transferred provided there is a
storage medium without write protection and
with sufficient free memory connected.
Otherwise you are notified of the problem with
the data transfer by means of an error
message.
120
TRIP
Transferring data via the
®
Bluetooth interface

Please note that the radio connection
between the two devices must be activated
®
for data transfer using Bluetooth . To find out
how to activate this radio connection, please
refer to the section "Switching Bluetooth on"
on page 51.
to USB
You will only be able to access the "
transfer method if there is a USB memory
stick connected to the USB interface. To find
out more about the permissible USB memory
media, please refer to the section "Notes on
the media supported" on page 42.
6. Select " to Bluetooth ".
7. The list of known devices that are suitable for
a transfer is displayed. If the desired device is
not there, you can search for further devices.
To do this, press " New device " (see also the
section "Adding a new Bluetooth device" on
page 61).
8. Sign on the desired device.
"