CAUTION:
all bays are populated with either a component or a blank.
Remove the component as indicated.
Removing a hard drive
IMPORTANT:
optional controller is installed in the server.
Back up all data on the hard drive.
1.
Remove the front bezel
2.
CAUTION:
all bays are populated with either a component or a blank.
To prevent improper cooling and thermal damage, do not operate the server unless
Hot-plug capability and drive LED support are only available when a supported
("Removing the front
To prevent improper cooling and thermal damage, do not operate the server unless
bezel" on page 25).
Removal and replacement procedures 30