HP ProLiant ML110 G7 Maintenance And Service Manual page 66

Open the processor retaining latch and the processor socket retaining bracket.
2.
Remove the plastic protective cover from the processor socket.
3.
Install the processor.
4.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
Do not touch the bottom of the processor, especially the contact area.
•
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board:
Do not touch the processor socket contacts.
•
• Do not tilt or slide the processor when lowering the processor into the socket.
Close the processor retaining bracket and the processor retaining latch.
5.
CAUTION: Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
Removal and replacement procedures 66