HP ProLiant ML110 G7 Maintenance And Service Manual page 33

Using a T-15 Torx screwdriver, remove the four screws, and then remove the hard drive cage from the
6.
drive cage bay.
Slide the optional drive cage assembly partially into the server chassis.
7.
Connect the cabling to the hard drive cage. Connect the mini-SAS cable by choosing one of the
8.
following:
For SATA RAID support, connect the cable directly to the system board.
o
Item Description
Connect the power cable
1
Connect the mini-SAS cable to the system board mini-SAS
2
cable connector
Connect the I
3
C cable
2
Removal and replacement procedures 33