Sharp MX-2010U Technical Handy Manual page 61

SHARP
Reference
COP1857 Reduction of noise from actuator movement on the RSPF transport or base
tray sections.
COP1855 Elimination of Fusing Lower PG Pawls on Fusing Rear Upper PG
COP1854 No power due to broken electronic circuit on DC power supply PWB
COP1848 Elimination of the right adjuster
COP1839 F2-64/65/66/67 Trouble code
COP1837 Defective contact with SD card terminal
COP1836 Service manual correction - Troubleshooting [Jam Code]
COP1834 Improved cleaning performance of the process unit cleaning blade
COP1833 Measures against the peeling of the fusing paper enter PG mylar
COP1832 Measures to prevent fusing harness damage
COP1829 Enhancement to prevent condensation inside the scanner unit
COP1826 Scan to OSX10.7 using FTP
COP1825 Enhancement to prevent fusing belt damage
COP1822 Service manual correction - Maintenance [Fuser]
COP1819 C4-00 trouble due to misalignment of the TC PWB
COP1816 Pressure release idle gear strength increase
COP1814 Configuring ID card with internal user control
COP1812 Measures to prevent the follower roller end within the 1st transfer unit
becoming damaged
COP1804 Rom version upgrade (including revision history)
COP1800 Measures to prevent the 2nd transfer belt damage
COP1799 Measures to reduce the sound level of the actuator movement when
scanning originals through document feeder
COP1797 Improvement of silence level inside the paper feed unit and the transport
drive unit.
COP1796 Measures to prevent the DV drive pulley in the main drive unit becoming
damaged
COP1790 Abnormal noise from the right door unit
COP1784 Change of DV cover to prevent toner splatter
COP1777 Rom version upgrade
COP1775 Breakage of the heater lamp upper harness coating
COP1773 Fusing pressure spring strength increase
COP1769 Measures to prevent fusing belt damage due to belt slippage.
COP1767 Further improvement against the deformation of the handle securing plate
COP1765 Sharp Remote Device Manager (SRDM) v1.1
COP1761 Addition of arm holder to the original tray cover [RSPF]
COP1758 Rom version upgrade
COP1757 Abnormal noise created by the transfer contact spring of the high voltage
power supply coming loose
COP1750 Countermeasure against the deformation of the main body position boss
COP1745 POD2_N jam within the delivery unit
COP1744 Measures against toner dispersion from the process unit
TECHNICAL BULLETIN INDEX
Description Model
All
MX-2310U
All
MX-DE12/13/14
All
MX-2310U
All
All
All
All
All
All
MX-2310U
All
All
All
All
All
MX-2310U
All
All
All
All
All
All
MX-FR25U
All
MX-2310U
MX-2310U
MX-2310U
All
MX-2310U
MX-2010U
MX-2310U
MX-DE12/13/14
MX-2310U
MX-2310U
61