Sharp MX-2010U Technical Handy Manual page 49

SHARP
Error Job Log / Status Monitor Message
0427
0428
0429
042A
042B
The requested job was cancelled due to the
042C
042D
042E
042F
0430
0431
0432
0433
0434
0435
0436
You don't have the authority to use this
0437
function. The requested job was cancelled
due to the following reason:
0438
0439
043A
043B
043C
0440
0441
0442
0443
The requested job was cancelled due to the
0444
0445
0446
0447
0448
0449
044A
044B
044C
0501
Your job has been cancelled by user.
0502 Your store job has been deleted by user
following reason:
following reason:
JOB LOG ERROR CODES
Comment
(Disabling of Print Jobs other Than Hold Job and
Disabling of Confidential Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Storing to the selected folder)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Quick File Mode)
(Retention printing: Prohibited)
(Hard disk full or memory full)
(Offset: Disabled)
(Disabling of printing)
(Invalid user)
(Number of allowable pages exceeded the limit)
(Print quality: Conflict of setting parameter)
(PCL is not available) Check the printer driver.
(SPLC is not available) Check the printer driver.
(PDF is not available) Check the printer driver.
(Colour mode: Disabling of full colour)
(Colour mode: Disabling of B/W)
(Colour mode: Disabling of B/W and full colour)
(Only 2-sided print approved)
(1-sided/2-sided print disabled)
(Staple: Prohibited)
(Punch: Prohibited)
(Folding Unit: Prohibited)
(B/W or Auto job is sent when Document control
pattern is set to always print in colour.)
(Folding Unit: Incorrect paper size)
(Inverter: Failure)
(Inverter: Prohibited)
(Incorrect paper size)
(Incorrect paper type)
(Staple: Slant staple cannot be used)
(Tandem Printing: Disabling of Slave M/C Mode
(Colour mode: Disabling of 3 colour)
(Colour mode: Disabling of 2 colour)
(Colour mode: Disabling of Single colour)
(XPS is not available): Please check your printer
49