Wiring
3.1 Wiring and block diagram
Connection: 2-wire connection of actuators
The following figure shows the block diagram and an example of the terminal assignment of
the digital output module RQ 4x24VUC/2A CO ST on the BaseUnit BU type A0.
①
2-wire connection
②
Backplane bus interface
③
Polarity reversal protection
④
Color identification label CCxx (optional)
⑤
Filter connection supply voltage (only when light-
colored BaseUnit is present)
P1, P2, AUX
Internal self-assembling voltage buses
Connection to left (dark-colored BaseUnit)
.0, .1, .2, .3
Channel status LED (green)
Figure 3-1
Wiring and block diagram for 2-wire connection of actuators
14
11.n
Common contact
12.n
Normally closed contact
14.n
Normally open contact
n
Channel
DIAG
Diagnostics LED (green, red)
L+
24 V DC (infeed only with light-colored
BaseUnit)
PWR
Power LED (green)
M
Ground
Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)
Manual, 09/2017, A5E32855952-AB