Reading Data From The Module - Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual

Reading data from the module

Read the hardware logic saved in the flash ROM of the flexible high-speed I/O control module to the configuration tool.
The hardware logic being edited is overwritten by the read data. Save the hardware logic before the data reading as
necessary.
Reading data
The following describes how to read data.
1.
Select the following item.
[Online]  [Read from Module (flash ROM)]
2.
To read the hardware logic with a password, input the password set when the data was written to the module.
8 FUNCTIONS OF THE CONFIGURATION TOOL
90
8.9 Online Functions