Table of Contents
Advertisement
The screen contains the following details:
Filed
Enable UPnP
Click "CANCEL" to exit from this page without saving the changes.
Click "APPLY" at any time during configure to save the information that you
have been entered.
Chapter 4 Operating the VDSL2 System
4.1 Configuration Settings
Configure and start the VC-200M and the CPE.
Configuration: As a minimum configuration, usually selecting the profile is
required.
See Chapter 4.1.3, Profile Configuration
Next, both sides should be activated from the Web UI.
See
Chapter 4.1.4, Line Activation
The connection status of the link can be monitored.
See
Chapter 4.1.5, Channel Status
Description
To enable or disable UPnP Setting. Select the check box to
Enable or Disable the UPnP function of VC-200M/VC-200S.
46
Advertisement
Table of Contents
