Table of Contents
Advertisement
VC-200S.
II.
Uses the supplied RJ-11cable connects to VC-200M or VC-200S with your
phone company.
Step 2. Connect a Workstation to the Router's LAN port
Uses the supplied RJ-45 cable connects to PC with the Switching Hub port of
VC-200M / VC-200S. Both 10Base-T and 100Base-TX connections can be used
simultaneously.
If required, using a standard RJ-45 cable connect to any LAN port of VC-200M /
VC-200S with a normal Hub.
Any LAN port of VC-200M / VC-200S will automatically function as an "Uplink"
port when required.
Step 3. Connect the Power Adapter to the Router
Connect the power adapter to the port labeled 12V DC on the rear panel of router.
Step 4. Connect All Cables to the Network
The procedure for connecting cables differs depending on whether or not your
telephone equipment is connected to a POTS splitter.
2.3 Configuring the Network Properties
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic View). In the Control Panel,
double-click on Network Connections
2. Double-click Local Area Connection.
11
Advertisement
Table of Contents
