Administrator Settings; Device Mode - Planet VC-200S User Manual

Click "APPLY" to save the information that has been entered.

3.5.3.3 Administrator Settings

To add a user or change user's password, click on the Administrator Settings link in
the left navigation bar, show as below.
While adding a user, each user must be assigned a separate port. Hence the number of
user that can bee added to the system depends on the number of ports available on the
VC-200M/VC-200S.
Filed
Current Password
Password
Re-Type Password
Auto-Logout Time

3.5.3.4 Device Mode

The VC-200M/VC-200S used in the reference system is able to act as either a bridge
or a router. Clicking on Device Mode link on the left navigation bar allows the user to
change the mode of operation, show as below.
Description
This is the password associate with the administrator. This is
enabled only for the user Administrator login.
This is the password of the login administrator.
This is password verification.
The auto-logout time, at least one minute.
28