Active; Channel Status - Planet VC-200S User Manual

Note: By factory default is VDSL2 Profile 17a-Bandplan ITU AnnexB_B12.

4.1.4 Active

To enable or disable VDSl2, click on the Active link in the left navigation bar, show
as below.
The screen contains the following details:
Setting
Line
Click "CANCEL" to exit from this page without saving the changes.
Click "APPLY" at any time during configure to save the information that you
have been entered.

4.1.5 Channel Status

To view the channel status is about Date Rate, Delay, Error Counters and Impulse
Noise Protection.
Description
Activate or deactivate the line.
51