Planet VC-200S User Manual page 9

Front Panel LED definition
LED
PWR
LNK
DSL
ACT
LNK/ACT
LAN
100
1-4
Rear Panel
Rear panel Port and Button Definition
Connector
POWER Power connector with 12V DC 1 A
Press 1-3 seconds for reboot system.
RESET
Button
Press more than 5 seconds for reset to factory default setting.
Router is successfully connected to a device through the corresponding
LAN (1-4) port (1, 2, 3, or 4). If the LED light of LNK/ACT is flashing, the Router
is actively sending or receiving data over that port.
State
When the router is powered on, and in ready
ON
state.
OFF When the router is powered off.
Router is trying to establish a connection
Flashing between VC-200M and VC-200S, or telecom's
network.
Successfully connected between VC-200M
ON and VC-200S, or router and telecom's network,
and in ready state.
Flashing Data is being transmitted or received.
Data is being transmitted or received via the
Flashing/ON
corresponding LAN port, and in ready state.
Orange color, it corresponding LAN port is
ON
using 100BaseT.
Description
9
Description