Learned Mac Table - Planet ADW-4100 User Manual

Admin
Privilege
System Default Gateway Configuration
The system-wide Default Gateway now provides three options: Auto, User-
selected Network Interface, and None.
None
This field allows the user to choose to have no Default Gateway in the CPE
Auto
This field allows the user to select the CPE to automatically decide the Default
Gateway. (System Default)
User-selected Network Interface
This field allows user to select a Network Interface from a list (PVCs, PPP Sessions,
USB and LAN). This option lets the user to associate the system-wide Default
Gateway to a Network Interface, static or dynamic, and provides a way to fix the
Default Gateway to a dynamic Network Interface before the interface is established.
Route Configuration
Destination
This field allows the user to enter the remote network or host IP address for the
static routing.
Netmask
This field allows the user to enter the Subnet Mask for the static routing.
Gateway
This field allows the user to enter the IP address of the gateway device that allows
the router to contact the remote network or the host for Specified IP or select an
Interface for the Gateway.
Manually Configured Routes displays the static route entries entered by the user

Learned MAC Table

The Learned MAC Table page shows the current learned Bridge MAC table.
The Aging Timeout is for determining the update period for the MAC table.
Figure 6-5: Learned MAC Table Screen
41