Planet ADW-4100 User Manual page 27

ADW-4100 User Manual
Ÿ Session Name
This field allows the user to enter his/her own session Name to distinguish dif-
ferent session for different PPP accounts and different PVCs.
Ÿ PVC
This field allows the user to choose the specific PVC for PPP session.
Ÿ Service Name
The service name of PPP is required by some ISPs. If the ISP does not provide
the Service Name, please leave it blank.
Ÿ Disconnect Timeout
The Disconnect Timeout allows the user to set the specific period of time to dis-
connect from the ISP. The default is 0, which means never disconnect from the
ISP.
Ÿ MRU
Maximum Receive Unit indicates the peer of PPP connection the maximum size
of the PPP information field this device can be received. The default value is
1492 and is used in the beginning of the PPP negotiation. In the normal negotia-
tion, the peer will accept this MRU and will not send packet with information field
larger than this value.
Ÿ MTU
Maximum Transmission Unit indicates the network stack of any packet is larger
than this value will be fragmented before the transmission. During the PPP ne-
gotiation,the peer of the PPP connection will indicates its MRU and will be
accepted. The actual MTU of the PPP connection will be set to the smaller one
of MTU and the peer's MRU. The default is value 1492.
Ÿ MSS
Maximum Segment Size is the largest size of data that TCP will send in a single
IP packet. When a connection is established between a LAN client and a host in
the WAN side, the LAN client and the WAN host will indicate their MSS during
the TCP connection handshake. The default value is 1432.
Ÿ Automatic Reconnect
When it is checked, it will maintain the PPP connection all the time. If the ISP
shut down the PPP connection, it will automatically reconnect PPP session.
Ÿ Authentication
When AUTO option is chosen, the PAP mode will run first then CHAP.
Figure 4-16: PPP Configuration
22