Planet ADSL 2/2+ Router ADE-3410 User Manual page 8

Front Panel LED definition
LED
1 PWR
2 Link
3 Data
4 LAN
5 USB
Rear Panel
Rear Panel Port and Button Definition
Port
1 Line
2 USB
3 Ethernet
4 Reset
5 Power
Power
6
Switch
Meaning
Lit when power is ON.
Lit when DSL line is connected. Blink when DSL line is
training.
Blink when DSL data is transferring.
Lit when connected to an Ethernet device. Blink when data is
Transmitted / Received.
Lit when the USB port is connected to the PC and working
properly.
Meaning
Connect the supplied RJ-11 ("telephone") cable to this port
when connecting to the ADSL/telephone network.
Connect the supplied USB cable to this port when connecting
to the PC
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office / home
network of 10Mbps or 100Mbps.
After the device is powered on, press it to reset the device or
restore to factory default settings. Reset the device 6 seconds
above to restore the factory default settings (this is used when
you can not login to the router, e.g. forgot the password)
Connect the supplied power adapter to this jack (10 DC, 1A).
Power ON / OFF switch
8