Ip Qos - Planet ADSL 2/2+ Router ADE-3410 User Manual

static route information.
Destination: The IP address where packets will go to.
Subnet Mask: The subnet mask of the destination IP address.
Next Hop: The gateway that the packets will pass by during transmission.
Metric: Metric represents the "cost" of transmission for routing purposes. IP Routing uses
hop count as the measurement of cost, with a minimum of 1 for directly connected networks.
Enter a number that approximates the cost for this link. The number need not to be precise,
but it must between 1 and 15. In practice, 2 or 3 is usually a good number.
Interface: The interface that the packets pass through on the device.
Click "Add Route" to add this routing information.

3.5.5 IP QoS

Entries in this table are used to assign the precedence for each incoming packet based on
physical LAN port, TCP / UDP port number, and source / destination IP address / subnet
masks.
IP QoS: Enable or Disable IP QoS function. Click the "Apply Changes" to apply your
setting.
When you click "Add Rule" button, the IP QoS Setting screen will appear. You can specify
the network Outbound Priority on this setting.
40