Bridge - Planet ADSL 2/2+ Router ADE-3410 User Manual

Click "Enable" to enable UPnP function and select the WAN Interface. Click "Apply
Changes" to apply your setting.
Note
Please Commit/Reboot if you want to make this settings effective
immediately

3.5.8.3 Bridge

This page is used to configure the bridge parameters. Here you can change the settings or
view some information on the bridge and its attached ports.
Aging Time: Enter the time for the bridge.
802.1d Spanning Tree: You can Enable or Disable the 802.1d Spanning Tree Protocol.
Click "Apply Changes" to apply your setting.
Note
Please Commit/Reboot if you want to make this settings effective
immediately.
45