Panel Explanation; Vigor2862/Vigor2862B - Draytek Vigor2862 Series Quick Start Manual

3 . P a n e l E
3 . P a n e l E
3 . 1 V i g o r 2 8
3 . 1 V i g o r 2 8
LED
ACT (Activity)
WAN2
QoS
USB1~2 / USB
DSL/DSL 1/2
WCF
VPN
DMZ
LED on Connector
Left
LAN
LED
1~4
Right
x p l a n a t i o n
x p l a n a t i o n
6 2 / V i g o r 2 8 6
6 2 / V i g o r 2 8 6
Status
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
2 B
2 B
Explanation
The router is powered off.
The router is powered on and running
normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The router is ready to access Internet through
DSL link.
Slowly: The DSL connection is ready.
Quickly: The connection is training.
The Web Content Filter is active. (It is
enabled from Firewall >> General Setup).
WCF is disabled.
The VPN tunnel is active.
VPN services are disabled
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
3