Draytek Vigor2862 Series Quick Start Manual page 11

LED
Left
WAN2
LED
Right
LED
Switch on Rear Side
Interface
Factory Reset
DSL / DSL 1/2
LAN (1-4)
WAN2
USB1~2
PWR
ON/OFF Power Switch.
Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
Description
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Connecter for accessing the Internet.
Connecters for local network devices.
Connecter for local network devices or modem for
accessing Internet.
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
Connecter for a power adapter.
4