Draytek Vigor2862 Series Quick Start Manual page 17

please choose WAN2; if 3G USB modem is used, please choose WAN3 or WAN4.
Then click Next for next step. WAN1, WAN2, WAN3 and WAN4 will bring up
different configuration page. Here, we take WAN1 (ADSL/VDSL2) as an example.
Click Next to go to the following page. You have to select the appropriate
Internet access type according to the information from your ISP. For example,
you should select PPPoE mode if the ISP provides you PPPoE interface. In
addition, the field of For ADSL Only will be available only when ADSL is detected.
Then click Next for next step.
10