Configuration; Preparation; Using Your Web Browser - Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000 Quick Installation Manual

Configuration

The ADN-4000 contains a HTTP server. This enables you to connect to
it, and configure it, using your Web Browser.

Preparation

Before attempting to configure the ADN-4000, please ensure that:
• Your PC can establish a physical connection to the ADN-4000. The PC
and the ADN-4000 must be directly connected (using the Hub ports
on the ADN-4000) or on the same LAN segment.
• The ADN-4000 must be installed and powered ON.
• If the ADN-4000's default IP Address (192.168.1.1) is already used
by another device, the other device must be turned OFF until the
ADN-4000 is allocated a new IP Address during configuration.

Using your Web Browser

1. Open web browser and type http://192.168.1.1 in the browser's
address box. This number is the default IP address for this device.
Press Enter.