Table of Contents
Advertisement
4. User
Authentication
5. System Utility
6. Save Runtime
Configuration
6. Mirror
7. Statistic Information
8. Priority Tag
9. STA
10. Port Aggregation
1. System Restart
2. Default Factory Reset
3. Timeout Interval
Setup
4. TFTP Download
5. Local Transfer
6. Ping
7. Search Location by
Port Name
- 14 -
Enable or disable the mirror function and
choose the sniffer port and monitored port.
Show traffic information of each ports.
Define the 802.1p tag mapping and the
service rule. Please refer to section 4.13
for detail.
Show the spanning tree algorithm status
and configure its parameters.
Enable or disable the port aggregation
(port trunking) function on specified ports.
This menu allows you to configure the
password of root, admin and guest
account. Only root account has the right
to enter this menu.
Restart the switch.
available: cold start and warm start.
Reset the switch back to factory default
settings.
Configure the telnet timeout interval.
Update the firmware through TFTP server.
Transfer the firmware from master switch
to slave switch.
Ping a IP to test the connection status.
Input
a
port
name
correspondence of Device ID and Port
number.
Save the configuration you have make on
the switch.
Two options are
to
get
the
Advertisement
Table of Contents
