Table of Contents
Advertisement
Main menu
1. System
Information
2. Management
Setup
3. Device Control
Submenu
1. Topology Information
2. System Information
3. System Configuration
1. Network
Configuration
2. Console Port Status
Display
3. SNMP Community
Setup
4. Trap Receiver Control
5. Management
Features Control
6. Trap Filtering Setup
1. Port Status /
Configuration
2. Address Table
3. VLAN
4. Security
5. IGMP Snooping
- 13 -
Function
Show the Device ID, Hardware version,
Boot-up version, POST version, runtime
code version, agent status, device name
and device location of each switch on the
stack.
Show detail system information of each
switch including their hardware, software
version, system up time, system contact,
device name, device location and system
management capabilities.
Modify system contact, device name and
device location of each switch on the
stack.
Configure each switch's IP address,
subnet mask and default gateway.
Display the console port configuration, like
baudrate, databits, parity, etc.
Create,
modify
or
community
name,
associated with the name and the access
right. Up to 5 entries are supported.
Create, modify or delete the community
name, IP address and aging time of the
trap receivers.
Up to 5 receivers are
supported.
Enable or disable web, telnet and SNMP
management function of the switch. You
can also change the http port number on
this menu.
Define which events will trigger the trap on
this menu.
Show the status of each ports and
configure each ports settings.
allows you to configure each port's speed,
duplex,
flow
control
allocation..
Create, delete and display the MAC
address entries of each port.
also modify the aging time and search a
specified MAC address on this menu.
Two VLAN modes are supported on this
switch, 802.1Q VLAN and port group
VLAN.
Please select the VLAN mode
first and then make further configuration.
Please refer to section 4.9 for detail
configuration available on this switch.
This function is reserved for future use.
Enable or disable the IGMP Snooping.
You can also display the IP multicast
registration table on this menu.
delete
SNMP
the
IP
address
It also
and
bandwidth
You can
Advertisement
Table of Contents
