Disassembly - JVC KW-XC88 Service Manual

QQ
3 7 63 1515 0
3.1 Main body
3.1.1 Removing the front panel assembly
(See Fig.1, 2)
(1) From the both side of the main body, remove the four
screws A attaching the front panel assembly. (See Figs.1,
2)
(2) Release the four joints a using a screwdriver, then remove
the front panel assembly toward the front. (See Figs.1, 2)
3.1.2 Removing the rear bracket
TE
L 13942296513
(See Figs.3)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) From the back side of the main body, remove the ten
screws B, screw C and screw D attaching the rear bracket.
(2) Take out the rear bracket.
3.1.3 Removing the heat sink
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) From the left side of the main body, remove the two screws
E and three screws F attaching the heat sink.
www
.
http://www.xiaoyu163.com

DISASSEMBLY

x ao u163
y
i
http://www.xiaoyu163.com
SECTION 3
2 9
8
A
A
Front panel assembly
Joints a
Q Q
3 6 7 1 3 1 5
B C
B
B
F
co
.
9 4 2 8
Front panel assembly
Joints a
Fig.1
A
A
Fig.2
0 5 8 2 9 9 4 2 8
B
Rear braket
Fig.3
Heat sink
E F F
m
Fig.4
(No.MA099B)1-7
9 9
9 9
D