JVC KW-XC88 Service Manual page 50

QQ
3.2.3 Removing the CD mechanism assembly 3 7 63 1515 0
(See Fig.1, 6 to 9)
• Prior to performing the following procedure, remove the CD
mechanism control board and the front bracket (loading mo-
tor).
(1) Remove the three screws D and the damper bracket.
(2) Raise the both sides fix arms and move the fix plates in the
direction of the arrow to place the four shafts g as shown in
Fig.8 and 9.
(3) Remove the CD mechanism assembly and the two springs
h attaching the flame.
(4) Remove the two screws E and both sides rear damper
brackets from the dampers. Detach the CD mechanism as-
sembly from the left side to the right side.
ATTENTION:
The CD mechanism assembly can be removed if only the rear
damper bracket on the left side is removed.
TE
L 13942296513
www
.
1-14 (No.MA099B)
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
assembly
CD mechanism
D
Flame
h
D
Rear damper bracket
Fix plate (L)
Q Q
3 6 7 1 3 1 5
g
Rear damper bracket
Fix arm (R)
E
Damper
co
.
9 4 2 8
Damper bracket
D
Fig.6
D
Fig.7
Fix arm (L)
E
0 5 8 2 9 9 4 2 8
g
Damper
Fig.8
Fix plate(R)
g
g
Fig.9
m
9 9
h
9 9