Removing The Secondary Transfer Feed Unit - Canon MF735C Series Service Manual

Removing the Secondary Transfer Feed Unit

■ Preparation
1. "Removing the Toner Cartridge" on page 85
2. "Removing the Left Cover" on page 86
3. "Removing the Right Cover" on page 88
4. "Removing the Rear Cover Unit" on page 90
■ Procedure
1. Remove the Shaft Spacer on the rear left side.
NOTE:
When installing the Shaft Spacer, install it with the Secondary Transfer Feed Unit opened. Be sure to check the installation position
of the stopper.
5. Parts Replacement and Cleaning
143