Overview
Entering Service Mode
For information on how to enter service mode, contact the Support Dept. of the sales company.
Service Label
In factory setting, adjustments are made for each machine, and adjustment values are written in the service label.
In the case of the following, adjustment values for ADJUST or OPTION return to default. Therefore, when you made adjustments
in the field.
• Changed Main Controller PCB
• Changed Engine Controller PCB
• After RAM clear execution
Therefore, when you made adjustments and changed values of the Service Mode in the field, be sure to write down the changed
values in the service label. When there is no relevant field in the service label, write down the values in a blank field.
Remote UI Service Mode
■ Function Overview
It is possible to display, configure, and execute various service mode modes as well as restart the host machine by using remote
UI.
■ Operating conditions
In order to operate service mode using Remote UI, the following conditions must be met.
237
9. Service Mode