Procedure For Exporting/Importing Service Mode Setting Information - Canon MF735C Series Service Manual

6. Restart this machine, enter service mode, and confirm that the setting information is reflected. This completes the
procedure for importing a setting information file.
7. Enter service mode, and set the following item to "0".
• COPIER > OPRION > USER > SMD-EXPT
CAUTION:
Since the screen of export function can also be accessed by the user, be sure to disable the [SMD-EXPT] setting (setting
value: 0).

Procedure for Exporting/Importing Service Mode Setting Information

Service mode setting information can be backed up and restored by using service mode functions. The backup file can be saved
to a USB flash drive or a storage in the machine.
Backup/restoration to a USB flash drive
COPIER > FUNCTION >SYSTEM > EXPORT
COPIER > FUNCTION >SYSTEM > IMPORT
Backup/restoration to a storage in the machine
COPIER > FUNCTION >SYSTEM > SAVE-SM
COPIER > FUNCTION >SYSTEM > RSTR-SM
Storage destination USB flash drive
Number of files saved Depends on the capacity of the USB flash drive
Duplication of the setting Possible
values for other machines
■ Procedure for Exporting to a USB Flash Drive
Use the service mode function to save the service mode setting information to a USB flash drive.
This operation can be performed both from the Control Panel and remote UI.
The following USB flash drives can be used for export/import.
• USB flash drive in FAT 16 format (storage capacity: 2 GB)
• USB flash drive in FAT 32 format (storage capacity: 32 GB)
Note that the descriptions in parenthesis in the procedure are the descriptions in the case of remote UI.
1. Connect the USB flash drive to the USB Memory Port.
2. Enter service mode, and execute the following service mode.
• COPIER > FUNCTION > SYSTEM > EXPORT
CAUTION:
Even if the service mode is executed without connecting a USB flash drive, an error is not displayed.
It looks as if the process has been completed successfully, but the file has not been exported to anywhere.
For the reason shown above, be sure to check before execution that a USB flash drive is connected.
3. The message displayed during the process will disappear. When the display has returned to the original state,
remove the USB flash drive.
4. Check that a setting information file (service.dcm) exists in the directory directly under the root of the USB flash
drive.
This completes the export of a setting information file.
■ Procedure for Import from USB Flash Drive
1. Save the setting information file (service.dcm) to be imported to directly under the root of the USB flash drive.
2. Connect the USB flash drive to the USB Memory Port.
Backup/restoration to a USB flash drive Backup/restoration to a storage in the machine
Storage in the machine
One
Not possible
59
3. Technical Explanation (System)