Using The Nas Server's Storage - Planet 2-Bay SATA NAS RAID Server NAS-7200 User Manual

3.2 Using the NAS Server's Storage

To use the NAS Server's storage, you should "Map" a drive letter to each folder on the NAS
folder, which you wish to access. The "Network Drive" will then be available to all Windows
programs. The procedure is as follows:
1. Open Network Neighborhood (or My Network Places).
On the "View" menu, select Details. The Comment column will now be visible.
2. Locate the NAS, as shown below.
If it is not listed, double-click Entire Network. Then double-click the Workgroup that the
NAS is in. (By default, the NAS is in Workgroup.)
3. Double click on the NAS icon. You will then see a list of shares (shared folders). You can
read and write files to these shares, unless the NAS administrator has blocked access.
4. To create a shortcut to an NAS folder, drag its icon to the desktop, and accept Windows
offer to create a shortcut.
Mapping a Network Drive
You can give a share (shared folder) on the NAS a drive letter on your PC; such as "F:"
This is called "mapping" the drive letter. To do this, follow this procedure:
1. Right-click on the desired share on the NAS.
2. On the pop-up menu, select "Map Network Drive..."
3. Select a drive letter for this folder, check the Reconnect at Logon checkbox, then click
"OK".
17