Planet 2-Bay SATA NAS RAID Server NAS-7200 User Manual page 38

Send E-Mail...
E-Mail Address
From Address
(Optional)
Subject (Optional)
Send Test Mail
Use Specified
SMTP Mail Server
SMTP Mail Server
SMTP Port Number Specify the port number used by SMTP server. It's 25 by default.
Mail Server requires If the SMTP Server requires a "login" in order to send mail, check it and
Check this to enable the sending of e-mail alerts by the NAS. Alerts will
be sent when there is some problem requiring the Administrator's
attention.
Enter from 1 to 3 E-Mail Addresses. The messages generated by the
NAS will be sent to these destinations. Note that special characters (e.g.
" / \ [ ] : ; | = , + * ? < > ' `) cannot be used in them.
Specify one E-Mail Address that appear in the "From" field of e-mail alert
generated by the NAS. Usually it's helpful for e-mail alerts to avoid being
filtered as junk mails.
Enter the text you wish to appear in the "Subject" field of e-mail alert
generated by the NAS. Note that special characters (e.g. " / \ [ ] : ; | = . ,
+ * ? < > ' `) cannot be used in it.
Send test mail to specified e-mail address to verify whether the e-mail
address can be reached.
You can specify one SMTP (Simple Mail Transport Protocol) server to be
used to send E-Mail. It's optional.
Specify the address of the SMTP Mail Server.
37