Table of Contents
Advertisement
Chapter 2. System
2.1 NAS-7100 - 1-Bay SATA NAS Server
2.1.1 Package Content
• NAS-7100
• Quick Installation Guide
• Setup CD
• Ethernet Cable
• Power Adapter with Power Core
• EMI core
2.1.2 Front Panel
Ready (Green)
• ON – Normal operation.
• OFF – No power.
• Blinking – This LED blinking during startup and shutdown.
Status (Amber)
Ready/Status
• ON – This LED will be On during the Startup self-test; it will
• OFF – Normal operation.
• Blinking – During a software upgrade, both the Status and
ON – Link established.
LAN
OFF – No LAN connection.
Blinking – Data is transmitted or received via the LAN.
OFF - Idle.
Disk
Blinking – Hard disk is being accessed.
ON - Disk is completely full. No more data can be stored on
this disk
Disk Full
OFF -Normal operation, disk is not full.
Blinking - Disk is 98% full (The Buzzer will also beep 3 times.)
ON - USB device connected to the USB port
USB 1
OFF - No USB device installed
Fast Blinking - Data being transferred to or from the USB device
turn Off once the self-test is completed. If it stays ON, there
is a hardware error.
Ready LEDs will blink.
Advertisement
Table of Contents
