Planet 2-Bay SATA NAS RAID Server NAS-7200 User Manual page 15

4. The following screen will then be displayed. You can set the IP settings in this screen.
Please click "Next" after the configured.
Obtain an IP
address
automatically
(DHCP Client)
Fixed IP Address
5. You can configure the time settings in this screen. Please click "Next" after the configured.
Server Name
Workgroup
Name
Time Zone
Local
Date/Time
Select this only if your LAN has a DHCP Server.
This option is recommended. You need to enter the following
data.
•
IP address - The utility will suggest a unused IP address
within the address range used on your LAN. If you wish,
you can change this, but you must ensure the address is
unused.
•
Network Mask - This must match the value used by PCs
on your LAN.
•
Gateway - This must match the value used by PCs on your
LAN.
The Default Name is shown. You may change
this if you wish.
Normally, this
Workgroup name used by PCs on your LAN.
Select your time zone from the list.
Enter the local date (mm/dd/yyyy format) and
time.
14
name should match the